Switching On The Appliance; Switching Off The Appliance; Using Turbo Mode; Vacuuming With Accessories - Bosch BBS61 Gebrauchsanleitung

en Cleaning and servicing

Switching on the appliance

▶ Press ⁠ .
→ Fig.
11
a The status display lights up white.

Switching off the appliance

▶ Press .
a The status display goes out.

Using turbo mode

Requirement: The appliance has
been switched on.
→ "Switching on the appliance",
Page 36
▶ Press
→ Fig.
12
a The status display flashes white.

Vacuuming with accessories

Place the required accessory onto
1.
the suction pipe or the appliance's
connection port.
→ Fig.
13
After use, insert the accessory into
2.
the base station
→ Fig.
14

Cleaning and servicing

To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.

Cleaning products

Only use suitable cleaning products.
1
Depending on the appliance specifications
36
.
1
.
ATTENTION!
Using unsuitable cleaning products
or incorrect cleaning may damage
the appliance.
▶
Do not use harsh or abrasive de-
tergents.
▶
Do not use cleaning products with
a high alcohol content.
▶
Do not use hard scouring pads or
cleaning sponges.
▶
Wash sponge cloths thoroughly
before use.

Cleaning the appliance

Requirement: The appliance is
switched off.
→ "Switching off the appliance",
Page 36
Disconnect the appliance from the
1.
charging cable
Clean the appliance and the ac-
2.
cessory with a soft cloth and a
commercially available plastic
cleaner.

Emptying the dust container

Empty the dust container at the latest
when the fill level has reached the
mark. In order to achieve the
best possible vacuuming results,
empty the dust container after every
use of the vacuum cleaner.
Requirement: The appliance is
switched off.
→ "Switching off the appliance",
Page 36
Check the fill level of the dust con-
1.
tainer.
→ Fig.
15
Check how dirty the filter unit is
2.
and clean it if necessary.
→ "Cleaning the filter unit",
Page 37
1
.