The appliance components
q Mounting plate/Baseplate
w Power cable
e Wire aerial
r Display
t ON/OFF
DOWN
y
UP
u
i PRESET —
o PRESET +
a Battery compartment
s A.O.T./SNOOZE
d MEMORY/
f TIMER
g MODE/BASS
h VOL. —
ALARM SET q
j VOL. +
ALARM SET w
Setting up the appliance
First take all appliance components from the packaging and
remove all packing foil and tape.
Inserting the back-up batteries
The back-up batteries ensure that the time, date and alarm
time setting are not lost in the event of a power cut. For this
you require two 1.5 V batteries of the type AAA/Micro.
1. Open the lid of the battery compartment a on the under-
side of the kitchen radio.
2. Insert the batteries. Make sure the polarities are correct.
Otherwise, the memory receipt will not function and dam-
age may be caused to the appliance.
3. Close the lid of the battery compartment a.
The lid must audibly engage.
Note:
The back-up batteries must be checked at least once
per year and, if necessary, exchanged for new ones.
- On/off switch, radio function
- Selection button down
- Selection button up
- for the selection of memory slots
- for the selection of memory slots
- control for the timer switch off /
snooze button
- Save button/button lock
- control for the timer programming
- activates the super bass function
switches to display options
- Volume decrease
- alarm function 1 control
- Volume increase
- alarm function 2 control
- 6 -