Changing Batteries; Assembly And Connection Evaluation - Airzone FLEXA 3.0 IBPRO6 Benutzerhandbuch

Changing batteries

To replace the battery, separate the thermostat from its support and
replace the battery (CR2450).
Important: We recommend using of top-brand batteries. Using low-quality
batteries may reduce the duration of use.
Remember to deposit the old battery into an appropriate recycling point.
Note: Do not forget to remove the security system before taking away the
thermostat from the wall.

ASSEMBLY AND CONNECTION EVALUATION

Check the following aspects:
- The state of the LEDs of the main control board and the rest of control elements. Check the self-diagnose section of
the data sheet of the elements.
- The main control board LEDs of opening dampers light up sequentially.
- If all the thermostats are powered.
Important: In the main control board, check the correct performance of D3, D11 and D19 LEDs and motorized elements.
Meaning
Main control board
D3
activity
Main control board
D11
power
Association channel:
D19
active
Open dampers
Close dampers
ES
EN
FR
IT
PT
DE
Blinking Green
Solid Red
Solid Red
Solid Green
Solid Red
23