Incidences; Appendix; System Reset; Zone Reset - Airzone RADIANT365 Schnellinstallationsanleitung

INCIDENCES

If an error message is shown, you can check both the Installation Manual and the Self-diagnosis section. Please visit Myzone
web: myzone.airzone.es/productos/
ES

APPENDIX

EN

SYSTEM RESET

FR
If you want to return to factory values, press and hold SW1 until LED D19 stops blinking. Wait for the
LEDS to go back to their normal state before starting with the initial configuration process.
IT

ZONE RESET

PT

Blueface and Think thermostats reset

If needed, to reset a zone follow the steps shown in the section Advanced Configuration, Zone Parameters for Blueface and Think
DE
thermostats and the section Lite thermostat reset if using Lite thermostats.

Lite thermostat reset

If you want to return your Lite thermostat to factory values, pull down all the microswitchs and reinsert the thermostat in its
base. The LED will flash green twice when the reset process is completed.

CHANGING BATTERIES

To replace the battery, separate the thermostat from its support and
replace the battery (CR2450).
Important: We recommend using of top-brand batteries. Using low-quality
batteries may reduce the duration of use.
Remember to deposit the old battery into an appropriate recycling point.
Note: Do not forget to remove the security system before taking away the
thermostat from the wall.
30