ZENEC Z-E3215 Bedienungsanleitung Seite 22

OPERATION OF USB SOURCE
Make sure your mass storage device is FAT32 formatted.
Directory structure of your mass storage should not exceed 400 files or folders
each directory.
Make sure that the path length of single files does not exceed 200 characters.
Connected USB hard disks have to be formatted with FAT32 and are only
allowed to consume a maximum of 400mA (peak) current. Otherwise they
must be considered incompatible and can´t be used with the device.
By using the Gracenote data base, you can meet loading times up to one
minute, when selecting another USB memory device connected to
the USB hub.
Connected USB memory devices will be named hard disk 1 ‒ 4 after power
on. It's not guaranteed that memory devices keep the same after power-on.
NOTE:
See www.zenec.com for:
Compatible fi le formats and possible restrictions.
22