First, put the shaving head
–
recesses on the edge of the shaving head
protrusions in the cutting unit
slides correctly into the cutting unit
Place the blade in the middle of the shaving head
–
Press the catches on the shaving head fixture together a little
–
and replace it in the cutting unit
head fixture is engaged when you release the catches.
5) Remove loose hairs from the shaver with the brush
6) Replace the cutting unit
into place and is seated firmly.
■
Clean the housing and the mains adapter
NOTE
If...
... the shaving result is noticeably poorer, ...
–
... you have to the shave the same spot repeatedly to
–
achieve a good result, ...
... the shave takes much longer than usual, ...
–
... there is visible damage to the shaving heads
–
... you must change the shaving heads
Please contact Customer Services if you want to order shaving
heads
.
Storage
■
Always replace the protective cap
when you are not using the appliance.
■
Store the everything in a clean, dust-free and dry place.
│
GB │ MT
■
90
into the cutting unit
so that the shaving head
.
. Ensure that the shaving
on the shaver. Ensure that it snaps
.
onto the cutting unit
. The small
must lie over the
.
.
with a moist cloth.
, ...
SRR 3.7 D5