Sliding Closing Devices And Night Blinds - Arneg Belgrado 2 Ausstellung Und Gebrauchsanweisungen

Fluorescent bulb
1. Attach the bulb to the support
2. insert the pins into the holes of the
shelf price holders
3. block the support onto the shelf by
introducing the plugs onto the bulb
support pins as indicated
LED
1. Attach the bulb to the support
2. insert the pins into the holes of the
shelf price holders
3. block the support onto the shelf by
introducing the plugs onto the bulb
support pins as indicated
Proceed in reverse order to disassemble
Fluorescent bulb and LED disassembly procedure
- force the bulb support with a
1 screw driver as indicated
- remove the light bulb assembly
Upon completion, power can be re-applied to the cabinets

23. Sliding closing devices and night blinds

To avoid unnecessary dispersions of cold and to ensure hygiene of the goods exposed during
night time hours or in the event of electrical suspension,
sliding closures (glass) (Fig.21) or night blinds (self version H125-150) are available Fig.24.
For cabinets that have inner lighting, turn off the lights before closing the cabinet.
Wind and rewind the blinds delicately.
DO NOT allow the blind to rewind itself.
Procedure
Pitch
for as-
1
sembly of
2
the sliding
3
closure
4
devices
05060165 00 15-04-2016
Belgrado 2 - London 3
insert the first cover on the most inner part of the upper guide
rest the lower part on the most inner part of the lower guide
insert the second cover on the most outer part of the upper guide
rest the lower part on the outer part of the lower guide
VDL-VDA-SELF-83-H125-H150
Action
English
51