Function; Operation; Setting Alarm Limit - hager WXH20x Bedienungs- Und Montageanleitungen

z

4 Operation

Operating concept and display
elements
In the event of an alarm, the device switches
off the electric cooker, hob and informs the user
Colour of status LED (5)
green*
flashing red
slowly flashing red
slowly flashing blue
white
flashing purple-blue
flashing yellow-green
flashing white
flashing red
* The Status LED (5) lights up in green shortly after pressing the operation button (3).
Colour of battery status LED (7)
flashing red
flashing red
To avoid false alarms, we recommend:
- wiping the sensor unit with a damp cloth and
mild cleaning agent periodically

4.1 Setting alarm limit

The default setting is to be used for the initial
setup. The alarm limit can be adjusted to the
respective environment in the kitchen to ensure
optimum functioning of the device. The alarm
24
Acoustic signal
-
yes
yes
yes
No
No
yes
yes
Table 1: Meaning of status LED
Acoustic
signal
yes
-
Table 2: Meaning of the battery status LED
about the alarm situation via LEDs and acoustic
signals. For this purpose, the device has one
battery status LED (7), one status LED (5), three
operating buttons (1 ... 3) and two sensors (4).

Function

Cooker ready for use
Hazardous situation (pre-alarm)
Power supply to cooker interrupted (alarm)
Water leakage alarm (optional)
Setting mode 1
Setting mode 2
Setting mode 3
Setting mode 4 (normal AUX mode)
Setting mode 4 (reversed AUX mode)
Function
Battery charge too low, battery life still approx.
2 weeks.
Power supply to the cooker/hob is interrupted, LED
flashes until the battery is completely empty.
- leaving the sensor unit in its position and
avoiding unintended movement
limit can be adjusted if false alarms occur
frequently (see Manual Settings). To do this,
set the alarm limit two levels higher or lower
(maximum) as recommended