Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
Display and light
To turn display (5) "on", either:
(† fig.
•
Push button "1" (4)
•
Squeeze the trigger/switch.
To turn light "on/off":
•
Push button "1" (4).
Display and light shut off automatically after
30 seconds if gun is not operating.
Speed selection
Pressing button "2" (4) switches the tool be-
tween high and low pump speed. The letter
"L" or "h" will be displayed on the screen.
High delivers
160 ml/min. (5.5 oz/min.)
69 bar (1 000 psi)
back pressure.
Low delivers
100
ml/min.
(3.5 oz/min.)
69 bar (1 000 psi)
back pressure.
Switching units
Switch units of measure between ounces
or grams by holding button "1" (4) for
15 seconds
(† fig.
3).
Control/monitor grease
application:
Refer to the display representations in
1
To set display reading to zero, press set but-
(† fig.
ton "1" (4) for 3 seconds
5
4
4A
3)
at
at
2
Squeeze trigger to run and stop the gun at
desired output.
fig.
4B).
3
Press button "2" (4) to switch between low
and high.
fig.
4.
4
Press button "1" (4) for 15 seconds to switch
between ounces and grams
4A).
(0.6 oz.
Is shown in
(† fig.
4C)
(† fig.
4C).
4B
11
!
Notice
Grease meter displays output only
if grease gun is adequately primed.
g
4C
Fig. 3
5
4
Fig. 4
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
