Design And Function; Overview; Assembling; Rating Plate - Caso 3540 Bedienungsanleitung

 The electrical outlet must be protected by a 16A safety cut-out switch.
 The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs
or gangs is prohibited because of the danger of fire that is involved with this.
 Make sure that the power cable is undamaged and has not been installed under the ice
maker or over hot or sharp surfaces.
 The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. Operations using an electrical outlet
without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.

14 Design and Function

In this chapter, you'll find important information on the design and function of the device.

14.2 Assembling

Place the juice tray with spout on the main body.
Place the filterinsert. Put the cone in the middle of filterinsert on the motor shaft.
Place the lid oft he cone in the opening of the handle.

14.3 Rating plate

The rating plate with the connection and performance data can be found beneath the
device.
Caso Zitruspresse CP 200 / CP 300

14.1 Overview

1 handle
2 lid of cone
3 filterinsert
4 juice tray
5 spout
6 lock of lid of cone
7 cone
8 main body with motor
26