Stop Switch; Cutting Attachment Guard - McCulloch B40 P ELITE Bedienungsanweisung

S1154653-38,B40 B,P ELITE_1.fm Page 8 Wednesday, March 14, 2012 7:51 AM
GENERAL SAFETY PRECAUTIONS
Check that the throttle trigger and throttle lockout move
freely and that the return springs work properly.
B40B
See instructions under the heading Start. Start the
machine and apply full throttle. Release the throttle and
check that the cutting attachment stops and remains at a
standstill. If the cutting attachment rotates with the throttle
in the idle position then the carburettor idle setting must
be checked. See instructions under the heading
Maintenance.
B40B

Stop switch

Use the stop switch to switch off the engine.
B40B
Start the engine and make sure the engine stops when
you move the stop switch to the stop setting.

Cutting attachment guard

This guard is intended to prevent loose objects from being
thrown towards the operator. The guard also protects the
8 – English
operator from accidental contact with the cutting
attachment.
B40P
Check that the guard is undamaged and not cracked.
Replace the guard if it has been exposed to impact or is
cracked.
Always use the recommended guard for the cutting
attachment you are using. See chapter on Technical data.
!
B40P
Vibration damping system
Your machine is equipped with a vibration damping
system that is designed to minimize vibration and make
operation easier.
B40P
Using incorrectly wound cord or a blunt or incorrect
cutting attachment (wrong type or incorrectly filed, see
instructions under the heading Filing the blade) increases
the level of vibration.
The machine ' s vibration damping system reduces the
transfer of vibration between the engine unit/cutting
equipment and the machine 's handle unit.
Check that the vibration damping element is undamaged
and securely attached. Contact your McCULLOCH dealer
to replace the vibration damping system. Visit
www.mcculloch.biz.
WARNING! Never use a cutting
attachment without an approved guard.
See the chapter on Technical data. If an
incorrect or faulty guard is fitted this can
cause serious personal injury.