Changing The Distance Display Unit (F1) - Nikon Prostaff 1000 Bedienungsanleitung

„ Changing the distance display unit (F1)
„
For the display unit of the measurement results, select YD (yards) or m (meters). Factory default setting is
En
YD (yard).
Es
1. Press the PWR button to turn on the Laser Rangefinder.
2. Press and hold the MODE button.
Fr
• You can now change the distance display unit.
De
3. The setting switches every time you press the PWR button.
It
Sv
(yard)
Nl
• If you press and hold the MODE button or do not operate the buttons for
Ru
about 8 seconds, the displayed setting is saved and the Laser Rangefinder
Pl
returns to standby.
• The setting is saved even when the Laser Rangefinder is turned OFF.
Fi
No
Dk
Cz
Ro
Hu
14
(meter)