Seav BeSUN Series Bedienungsanleitung Seite 9

BeSUN Electronic Control Unit
GB
An electronic control unit integrated into the Wind/Sun Sensor compart-
ment, for the automation of sun blinds and rolling window shutters, with the
possibility radio control operation for individual and/or centralised control.
- Mod. BeSUN 433 :
- Mod. BeSUN 433 SET :
- Mod. BeSUN 868 :
i
mportant for the user
- The device should not be used by chil-
dren or by individuals with reduced
physical or psychological abilities unless
supervision is provided or instruction
given on how to operate it.
- Do not let children play with the device;
keep radio controls out of their reach.
- CAUTION: Keep this instruction manual
in a safe place and adhere to the impor-
tant safety instructions contained within
it. Non-adherence to these instructions
may lead to property damage and seri-
ous accidents.
- Examine the system frequently to check
433,92 MHz
"Narrow Band" 433,92 MHz
"Narrow Band" 868,3 MHz
for any signs of damage. Do not use the
device if it needs to be repaired.
W : All operations which require
arning
the casing to be opened (such as wire
connection, programming, etc.) must be
carried out during installation, by skilled
staff only. For any other procedure which
requires the casing to be opened again
(re-programming, repairs or site modifica-
tions), please contact the technical assis-
tance service.
n i
otes for the nstaller
Before the shutter automation, it is nec-
-
essary to check it is in good condition and
that it complies with EN 12604 and the
Machines Directive.
- The wiring of external electrical compo-
nents must comply with EN 60204-1 as
amended in section 5.2.7 of EN 12453.
9