Introduction; Intended Use; Features; Package Contents - Parkside PAAP 12 A1 Originalbetriebsanleitung

CORDLESS POLISHER
PAAP 12 A1

Introduction

Congratulations on the purchase of your new
appliance . You have chosen a high-quality product .
The operating instructions are part of this product .
They contain important information about safety,
usage and disposal . Before using the product, please
familiarise yourself with all of the operating and
safety instructions . Use the product only as described
and for the range of applications specified . Please
also pass these operating instructions on to any
future owner .

Intended use

The appliance is designed for polishing or sanding
lacquers, coatings, plastics and other smooth
surfaces . Any other usage or modification of the
appliance is deemed to be improper and carries
a significant risk of accidents . The manu facturer
accepts no responsibility for damage(s) resulting
from improper usage . This appliance is intended
for domestic use only .

Features

Speed selector switch
Battery LED (charge level indicator)
Safety lock-out
Release button for the battery pack
Battery pack
ON/OFF switch
Polishing disc
Thread
Spindle lock
Fig. A
Additional handle
Polishing hood, orange
Polishing hood, black
Fake fur attachment
Sandpaper
■ 2 │ GB │ IE │ NI │ CY
Fig. B
Red charge control LED
Green charge control LED
High-speed charger

Package contents

1 cordless polisher
1 high-speed battery charger
1 battery pack
1 polishing disc Ø 75 mm (with Velcro fastener)
1 polishing hood, orange (for pre-polishing)
1 polishing hood, black (for final polishing)
1 fake fur attachment
5 75 mm sandpaper
1 additional handle
1 set of operating instructions

Technical specifications

Cordless polisher PAAP 12 A1:
Rated voltage:
Rated speed, 1st gear: n 0–2800 rpm
Rated speed, 2nd gear: n 0–8300 rpm
Polishing disc:
Thread:
Battery pack: PAPK 12 A2:
Type:
Rated voltage:
Cells:
Capacity:
High-speed battery charger: PLGK 12 A1
INPUT:
Rated voltage:
Rated power
consumption:
Fuse (internal):
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Protection class:
(DC)
12 V
Ø 75 mm
M6
LITHIUM ION
(DC)
12 V
3
2000 mAh/24 Wh
220–240 V ~ , 50–60 Hz
(AC)
50 W
T2A
2 A
(DC)
12 V
2400 mA
approx . 60 min
II / (double insulation)
PAAP 12 A1