The Built-In Flash And Vignetting; Slip-In Filter Holder - Nikon AF-S NIKKOR 200mm f/2G ED VR II Benutzerhandbuch

■ The built-in flash and vignetting

To prevent vignetting, do not use the lens hood.
Jp
Cameras
F65-Series/N65-Series*, F60-Series/N60*,
En
F55-Series/N55-Series*, F50-Series/N50*,
F-601/N6006*, Pronea 600i/6i*, Pronea S
De
■ Using the lens hood
Fr
Lens hoods minimise stray light and protect the lens.
Attaching the hood
Es
Se
Ru
Nl

■ Slip-in filter holder

Always use a (52mm screw-on) filter. A 52mm Screw-on Neutral Color NC Filter
It
is attached to the filter holder when shipped from the factory.
Ck
Ch
Kr
Slip-in Circular Polarizing Filter C-PL3L (optional)
• Blocks reflections from nonmetallic surfaces such as glass and water.
• When a Slip-in Circular Polarizing Filter C-PL3L is attached, the focus distance
is different from when a 52mm screw-on filter is attached. The distance scale
is shifted from the correct position. The closest focused distance is extended
slightly.
• The memory set position may change slightly when using focus preset. Attach
the C-PL3L filter before using the memory set function.
26
Vignetting occurs at any shooting distance.
• Fully tighten the lens hood screw ( 2 ).
• If the lens hood is not correctly attached,
vignetting may occur.
• To store the lens hood, attach it in the
reverse position.
1
Press down on the slip-in filter holder knob, and
turn counterclockwise until the white line on the
knob is at a right angle to the axis of the lens.
2
Pull the slip-in filter holder from the lens body
3
Detach the attached filter from the filter holder.
4
Screw a filter onto the side of the filter holder
marked with the words "Nikon" and "JAPAN".
• The slip-in filter holder can be attached with the
"Nikon" and "JAPAN" facing either the lens or
camera side without any effect on your pictures.
*Sold exclusively in the USA