Charge Mode - GYS GYSFLASH 30-12 HF Betriebsanleitung

CHARGE MODE

This product will charge the battery safely even if the battery is still in the vehicle.
Ensure that the correct sequences are followed.
Charge configuration :
Before starting to charge the battery, ensure that the charger has been correctly set (battery voltage,
charging curve and battery capacity).
3 charging curves :
−
Easy: simplified curve, suitable for every lead battery and which for it is not a required to know
the battery capacity. However for a maximum charge optimization, it is recommended when
possible to use the liquid or gel/AGM batteries charging curves.
−
Liquid: charging curve for vented battery (lead, lead calcium, lead calcium-silver, etc). For this
charging curve the battery capacity in Ah must be selected.
Gel/AGM: charging curve for sealed battery (gel, maintenance free, AGM...). For this charging
−
curve the battery capacity in Ah must be selected.
CHARGE MODE CONFIGURATION DEPENDING ON THE
CHARGE
gel/AGM
CHARGE
gel/AGM
CHARGE
gel/AGM
CHARGE
gel/AGM
Start up :
• Connect the clamps: red (+)
and black (-) of the battery.
• Push the START/STOP button
to start charging. A loading bar
displays.
• Push the START/STOP button
again to stop the charge.
.
BATTERY TYPE
CHARGE MODE START UP
CHARGE
gel/AGM
Only for Gysflash 30-24 HF
Only for liquid and gel/AGM
charging curves
CHARGE
gel/AGM
11