10.15.
Amazon Alexa® voice control
10.15.1.
Initial setup of the voice control
The initial setup of the device takes place via an app that must be installed on your
smartphone. This enables you to configure the settings to activate the voice control.
First, install the Medion Speaker app on your smartphone. This is
available free of charge from the App Store (Apple) or Google Play
Store (Android). Use a QR code scanner on your smartphone to
easily access the app in the Play or App Store. Alternatively, search
for "Medion Speaker".
Once the app has been installed on your smartphone, proceed as follows to contin-
ue the voice control setup process:
Start the Medion Speaker app on your smartphone.
Press FUNC. on the micro audio system or MODE on the remote control several
times until WIFI appears on the display.
Press and hold the
sounds. The device is now in configuration mode.
Add a device to the app and select the model MEDION MD44007 from the list
in the following steps.
Follow the instructions in the app and search for network-enabled devices in the
WLAN settings of your smartphone. The micro audio system MD 44007_XXXX
appears in the list.
Select the device MD 44007_XXXX and connect it to your smartphone.
After establishing the connection, switch back to the app and follow the instruc-
tions.
You will hear an indication that the devices have been connected successfully and
you should continue to follow the app instructions.
The instructions go on to process the setup of the Amazon Alexa account. Fol-
low the instructions on the screen here as well.
To activate Amazon Alexa®, register the micro audio system in your Amazon ac-
count. You need to be registered on Amazon for this:
Once the settings are completed, you can close the Medion Speaker app.
10.15.2.
Control
The voice control reacts to your voice. As soon as you talk to the device with "Alexa"
it will respond to your requests.
You can also activate the Amazon Alexa® feature by pressing the
10.15.3.
Muting the microphone
Press the microphone mute button
device. Amazon Alexa® no longer receives signals in this case and is deactivated. The
LED indicator below the display then lights up red. Press the button again to reacti-
vate the microphone and to reactivate Amazon Alexa.
74
button on the micro audio system until an announcement
if you wish to mute the microphone of your
button.