Eject Button; Time Display; 12 Disc Info Skip - Harman Kardon HK 3700 Bedienungsanleitung

Operation
While the disc is playing, the track being played
will show as a number in the middle of the
display. The elapsed time of the track being
played will also appear in the display (see figure
page 10). As a disc plays, the track numbers will
change, and the time will be shown at the
start of each new track.
To momentarily pause, press the Pause button
13 . Note that a Pause indication will appear
in the display to remind you that the disc is
paused. Press either the Play button
Pause button 13
to resume normal playback.
To stop the disc, press the Stop button
When the Stop button is pressed the display will
again show the total number of tracks and total
running time of the disc.
To remove a disc from the player, press the

Eject button

2 . To prevent dirt and dust from
entering the unit, do not leave the disc tray open.
To place the unit in a Standby mode, press the
Power Switch
on the front panel or the
1
Power Off button on the remote. The display
1
will show a STANDBY message for a moment and
the Status Mode Indicator will glow amber,
indicating that the unit is off, but ready to accept
a Power On command from the remote. If the
disc drawer is open, it will automatically close
when the unit is placed in the Standby mode.
This ensures that the unit will not be harmed
from dust, dirt or inadvertent damage to the
drawer mechanism.
Note that the unit is not removed from AC main
power when it is in the Standby mode but its
power consumption is reduced to a low value.
To remove the AC power completely from the
unit its Power cord must be plugged into a
switch controlled AC outlet that is turned off.
We recommend to use the switched AC outlet
on the rear side of a receiver or amplifier. When
that AC outlet will be turned on, the HD3700 will
always turn to the Standby mode even if it was
on before the AC power was removed.

Time Display

The CD player's time display is capable of
showing a wide range of information about a CD.
In normal operation the display will show the
total running time of a CD after the disc is first
put in the unit. When the disc is played, the
display will show the running time of a track
in play. Each time the track changes, the time
display will reset
again as the new track plays.
13 or the
To view the time remaining on an individual
track, press the Time button
16 .
once. The display will now show the track time
remaining, and a '-' will light in front of the time
display as a reminder of the display's status.
To view the elapsed time of the disc currently
playing, press the Time button
To view the total time remaining on the disc,
press the Time button again. Will display the
remaining total time on the disc with a '-' in the
front, starting from the next track of the formerly
played track.
When the Time button is pressed again, the
display will return to show the elapsed time of
the track in play.
Note: When a program is played (see page 13),
all time modes are selectable except the total
time remaining on the disc.
The time mode is available and pressing this
button switches back to the time viewing mode if
you are in the info viewing mode.
Disc Info
The HD3700 is able to show CD-Text information
from CDs, as well as ID3 tag and other
information from discs containing MP3 data.
Please note that not all CD's contain CD-Text.
In that case, the Information Display will show
NO CD-TEXT and will return to the time mode
previously selected.
and begin to increase If you play back a CD that contains CD-Text
information the TEXT indicator will light in the
Information Display. During playback, the
artist name, track name, and album name can be
made visible on the Information Display by
6 on the remote
pressing the Info button
times. Each press of the Info button
show the next line of information. If the text is
longer than 12 characters, the text will scroll
continuously from right to left on the
Information Display.
6 again.
If you play a disc with MP3 data, the filename,
the data rate (Constant Bit Rate CBR and
Variable Bit Rate VBR) and folder/root name can
be made visible on the Information Display
by pressing the Info button
consecutive times. If ID3 tag information is
included in the MP3 data, the artist name, track
name, and album name can also be made visible.
Each press of the Info button
next line of information. If the text is longer than
12 characters, the text will scroll continuously
from right to left on the Information Display.
To return to the normal Track/Time indication
press the Time button
5 several consecutive
5 will
5 several
5 will show the
6 .
OPERATION 11