Setting Up; Before Taking Into Use; Operation; Adjusting The Browning Level - Silvercrest STC 920 A1 Bedienungsanleitung

Setting up

CAUTION – RISK OF FIRE
► You should therefore NEVER locate the appliance close to or underneath
inflammable objects, especially not under curtains or suspended cupboards .
■ Unwind the cable completely from around the cable winder 9 and lead it
through the cable clamp 1 .
■ Place the appliance on a level and heat-resistant surface .
■ Insert the plug into a mains power socket .
NOTICE
► When the toaster is not in use, always remove the plug from the mains power
socket . This is the only way to ensure that the appliance is current-free .

Before taking into use

■ Operate the toaster without bread for 3 times at the maximum browning
level "6" .
■ Afterwards, clean the toaster as described in the chapter "Cleaning" .
NOTICE
► The operating button 8 only engages when the cable is connected to a
mains power socket .
► With the first usage a slight smell can arise (minimal smoke development is
also possible) . This is normal and dissipates after a short time . Provide for
sufficient ventilation . For example, open a window .

Operation

Adjusting the browning level

The desired level of browning, from "light" (1) to "dark" (6), can be adjusted
infinitely with the toasting dial 2 .
■ 24 │ GB │ IE
STC
920 A1