Audio Mode - Denver DAB-56C Bedienungsanleitung

SELECTING A STATION
MANAUL TUNING
Short press the TUNING+ or TUNING- BUTTON to change the tuning frequency.
note: Wait for a second or so between each press for the UNIT to re-tune.
PRESETS
TO STORE A STATION PRESET
1. Select an FM or DAB station as described above.
2. Press and hold one of the Preset keys (for approximately 3s) until the display shows "Preset 1
stored"
TO RECALL A STATION PRESET
1. Short press the required preset key.
Please note: 8 presets are available in both DAB and FM modes.
You can overwrite any of the presets at any time by holding the preset key until 'Preset x
stored' is shown.

AUDIO MODE

Normally, the UNIT will automatically select Mono or Stereo mode depending on what is being
broadcast and the signal strength. However if a stereo station is being received and the signal is
weak, some hiss may be audible. To reduce the hiss it is possible to switch the UNIT from Auto to
Mono mode.
1. Short press the ENTER button to display the Audio Mode screen.
2. Short press the ENTER button to switch between Auto and Mono modes. The new setting is
shown for a short time and then the display returns to the Radio screen.
INFO
The UNIT has six FM information modes which are shown on the bottom line of the display. Short
press the INFO/SETUP button to see the available types.
1 .PTY (program type)
Displays the type of station content being broadcast e.g. Classic, Pop, News, etc.
2. Signal strength
Displays the signal strength for the station being listened to.
3. Time and Date
Displays current time and date, received off-air.
4. Station frequency
Displays the frequency of the station being listened to.
5. Audio mode
Displays the current audio mode setting i.e. Auto(Stereo) or Mono.
6. Radio Text
Scrolling text which includes messages such as Artist and track name, phone numbers,
program details, etc.
USING THE AUX INPUT
1.Connect the AUX connect wire from the out jack of your Personal Player such as portable MP3
player to the AUX input jack.
2. Power on the unit by pressing the STANDBY button
3.Turn on your Personal Player to begin playing, adjust the volume to desire listening level.
4. Adjust the volume by pressing the Vol + or Vol – button
Note: Once the AUX jack is inserted with the aux plug, The FM/DAB sound is muted but the
display will not be changed.
ENG-6