General Information; Contact Address; Warranty; Information On The Internet - bürkert 3270 Kurzanleitung

▶ Do not make any internal or external modifications on the device.
Do not paint housing parts or screws.
▶ Avoid using the on/off valve in the vicinity of strong magnetic fields.
▶ Secure the device from unintentional actuation.
▶ Only trained technicians may perform installation and maintenance
work.
▶ After an interruption in the power supply, ensure that the process
is restarted in a defined or controlled manner.
▶ Observe the general rules of technology.
note!
electrostatic sensitive components and modules!
The device contains electronic components which react sensitively
to electrostatic discharge (ESD). Contact with electrostatically
charged persons or objects are hazardous to these components. In
the worst case scenario, they will be destroyed immediately or will
fail when energized.
• Observe the requirements in accordance with EN 61340-5-1 to
minimize or avoid the possibility of damage caused by sudden
electrostatic discharge!
• Do not touch electronic components while the supply voltage is
switched on!
6
english
Type 3270, 3275
Generalinformation
4 General informaTion
4.1 contact address
germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: info@de.buerkert.com
international
Contact addresses are found on the final pages of the printed oper-
ating manual. You can also find information on the Internet under:
www.burkert.com
4.2

Warranty

The warranty is only valid if the electromotive on/off valve Type 3270
and 3275 is used correctly in accordance with the specified operating
conditions.
4.3 information on the internet
The operating instructions and data sheets for Types 3270 and 3275
can be found on the Internet at: www.burkert.com