Setting And Starting A Washing Programme - Progress PI1315 Benutzerinformation

Put the glasses with long stems in the cup
racks with the stems up. For longer items,
fold the cup racks up.
Adjustment of the height of the upper
basket
You can put the upper basket in two posi-
tions to increase the load flexibility.

SETTING AND STARTING A WASHING PROGRAMME

Select and start a washing programme
1. Close the door.
2. Select a washing programme. Refer to
'Washing programmes'.
– The on/off indicator light comes on.
3. Press the start/cancel button. The
washing programme starts automati-
cally.
– The start/cancel indicator light
comes on.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
Caution! Adjust the height before you
load the upper basket.
Maximum height of the dishes in:
Higher position
Lower position
Do these steps to move the upper basket
to the higher position:
1. Move the front runner stops (A) out.
2. Pull the basket out.
3. Put the basket in the upper position.
4. Put back the front runner stops (A) in
their initial position.
Caution! If the basket is in the upper
position, do not put cups on the cup
racks.
Cancelling the washing programme
If the washing programme has not started,
you can change the selection.
To change the selection while the washing
programme operates, it is necessary to
cancel the programme.
• Press and hold the start/cancel button
until the start/cancel indicator goes off.
Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
End of the washing programme
When the washing programme is comple-
ted, the end indicator comes on.
Deactivate the appliance and open the ap-
pliance door.
progress 25
the upper the lower
basket basket
20 cm 31 cm
24 cm 27 cm