Herunterladen Inhalt Inhalt Diese Seite drucken

Torque Adjustment - Ingersoll-Rand EL0410BC–SS–ESD-Serie Bedienungsanleitung

Elektrische drehschrauber
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 26

TORQUE ADJUSTMENT

To adjust the torque on these screwdrivers, proceed as
follows:
1. Determine the torque output of the tool by checking a
tightened fastener with a torque wrench.
2. Increase or decrease the torque output by rotating the
Clutch Adjusting Ring (57). Rotating the Ring
clockwise to a higher number on the Torque Scale
increase torque output while rotating the Ring
counterclockwise to a lower number decreases the
torque output.
The numbers from zero to seven on the Torque
Scale are reference numbers only and are not an
indication of actual torque output.
Model No.
EL0410BC–SS–ESD
EL0510BC–SS–ESD
EL0807BC–SS–ESD
EL1007BC–SS–ESD
EL1007BC–ESD
Model No.
EL0410BC–SS–ESD
EL0510BC–SS–ESD
EL0807BC–SS–ESD
EL1007BC–SS–ESD
EL1007BC–ESD
H
Tested in accordance with PNEUROP PN8NTC1.2
♦ Tested in accordance to ISO8662–1 at free speed.
SERIES EL–ESD
Volts
Revolutions
(Direct Current)
24 VDC
24 VDC
24 VDC
24 VDC
24 VDC
Length
in.
mm
10.4
264.16
10.4
264.16
10.4
264.16
10.4
264.16
10.4
264.16
INGERSOLL–RAND
PROFESSIONAL TOOLS
Allen & Martinsville Roads, PO Box 1776
Liberty Corner, NJ 07938
3. Check the adjustment with a torque wrench. A number
of factors will affect torque output from one job to
another. Final torque adjustment should be made at the
job through a series of gradual increase. Always start
below the desired torque and work upward.
Do not drop or abuse the tool.
Whenever a tool is not being used, position the Power
Switch to the "OFF" position and unplug the power
cord.
DO NOT ATTEMPT TO REPAIR THIS TOOL.
All repairs and maintenance of this tool and its cord
must be performed by an authorized service center. See
Form 6647 for the service center nearest you.
Torque Range
Per Minute
in–lbs
1,000
4
1,000
5
700
8
700
10
700
10
Drive Size
in.
0.16 RD.
0.16 RD.
0.16 RD.
0.16 RD.
0.25 HEX
4
Nm
lbs
.45
.95
.57
.95
.90
.95
1.13
.95
1.13
.99
HSound
Pressure
dB (A)
54.6
54.6
53.7
54.1
51.3
Weight
kg
0.43
0.43
0.43
0.43
0.45
Vibrations
Level
2
m/s
0.5
0.5
0.3
0.4
0.4

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis