Replacing The Oven Lamp - BORETTI CFBG901AN Montage- Und Gebrauchsanweisungen

REPLACING THE OVEN LAMP

WARNING: Ensure the appliance is switched off and disconnected from the electrical
power supply before replacing the lamp to avoid the possibility of electric shock.
• Let the oven cavity and the heating elements to cool down.
• Switch off the electrical supply.
Remove the protective cover "A" (fig. 6.14).
•
• Replace the halogen lamp "B" with a new one suitable for high temperatures (300°C)
having the following specifications: 220-240 V, 50/60Hz and same power (check watt
power as stamped in the lamp itself) of the replaced lamp.


IMPORTANT WARNING: Never replace the bulb with bare hands; contamination from
your fingers can cause premature failure. Always use a clean cloth or gloves.
Refit the protective cover.
•
Note: Oven lamp replacement is not covered by your guarantee.
A
B
WRONG
CORRECT
A
B
Fig. 6.14
211