Ricoh Theta SC2 Kurzanleitung Seite 8

Connecting to a Smartphone
via Wireless LAN
When the camera is connected to a smartphone via a
wireless LAN, you can use the smartphone to shoot and
view still images and videos remotely, and make function
settings.
Turn the camera on, and then press the wireless button
to turn the wireless LAN function on. (
OLED panel.)
Then, turn on the Wi-Fi™ function of the smartphone.
Start the basic app for smartphone, tap
the instructions on the screen. (When the wireless LAN
connection is complete,
When establishing the connection manually, select the
SSID of the camera in the network list of the Wi-Fi™
settings on the smartphone and enter the password.
The serial number printed on the bottom of the
camera is the same as the SSID and password.
(00001017 in this case)
Password
YP 00
001017
SSID THETA + Serial number + .OSC
(THETAYP00001017.OSC in this case)
● You can change the password from the
●
smartphone.
● The password is initialized by pressing and
●
holding the wireless button and mode button
simultaneously while the power is on.
6
flashes on the
, and follow
stops flashing.)