Scanning For Tv Channels - LifeView TV Walker Q Plus Bedienungsanleitung

LifeView DTV

3.2 Scanning for TV Channels

Before you can watch digital TV, you
have to scan for available channels
in your area.
On the Menu Bar, click on Tool, then
click on Scan. You can also click on
the Scan button on the left side of
the screen.
Receiving Setup:
This shows the current reception standards the DTV application is set to. In general,
most countries have a bandwidth of 7, 8 MHz. Here, you can choose the setting that
matches your country.
Services Information:
This shows information about the currently selected channel when available. During a
scan, this will show information on the status of the scan
Channel Scan:
There are two ways to scan for available channels, Auto Scan and Transponder Scan.
1. Auto Scan:
Select Auto Scan, then select your country
from the drop-down box and click Scan.
2. Transponder Scan:
If you want to manually enter a frequency,
select Transponder Scan, type in the
Frequency in kHz and click Scan.
8