Before Using For The First Time; Temperature Unit; Date Format - Miele professional PG 8057 TD Kurzgebrauchsanweisung

Commissioning
During commissioning, the following set-
tings must be carried out. You will be
asked to programme settings one after
the other automatically and currently se-
lected values will have a tick  beside
them.
Commissioning follows a set process that
cannot be interrupted.
The commercial dishwasher will guide you
automatically through the steps required.
Reactivation is carried out during the first
programme following commissioning.
If the first programme after commission-
ing is not completed and the commercial
dishwasher is then switched off, the com-
missioning process must be carried out
again.
Switching on
Make sure that the dishwasher is connec-
ted to the electricity supply.
Press the  button until the button's LED

lights up.
Setting the language
The commissioning process automatically
begins at the language setting screen,
where you will be prompted to set the dis-
play language.
Language 
deutsch
(
english (GB)
Use the  and  arrow buttons to select

the desired language and confirm your
choice with the OK button.
en - Before using for the first time
Setting the temperature unit
The display will then change to the screen
for setting the temperature unit.

Temperature unit

°C
°F
Use the  and  arrow buttons to select

the desired temperature unit and confirm
your choice with the OK button.
Setting the date format
The display will then change to the screen
for setting the date format.

Date format

DD:MM:YY
MM:DD:YY
Use the  and  arrow buttons to select

the desired date format and confirm your
choice with the OK button.
Setting the date
The display will then change to the screen
for setting the date.
;
Use the arrow buttons  (higher) and 

,
(lower) to set the day, month and year,
and confirm each entry with the OK but-
ton.
(
(
Date
12 . 07 . 2013
29