HIKOKI NR 90GC2 Bedienungsanleitung Seite 12

English
SPECIFICATIONS
1. Gas Strip Nailer
Model
Type of power
Applicable nails
Numbers of loadable nails
Size
Weight
Nail-feeding method
Ambient temperature
Battery
Fuel cell
2. Charger (UC18YG)
Input power source
Charging time
Charging voltage
Charging current
Weight
NAIL SELECTION
Choose a suitable nail from Fig. Nails which are not shown in Fig. can not be driven with this tool.
[NR90GC2]
Only smooth, barbed and ring type nails are used. Do not use screw nails. Nails are formed into strips which consist of
25-37 nails.
[NR90GR2]
The use of any other nails can result in tool malfunction and/or nail breakdown, leading to serious injuries.
NR90GC2
Paper collated strip nails
Clipped-head nails
* This Nailer is not recommended for use with from 75 mm (3") to 90 mm (3-1/2") ring shank nails in pressured-treated
lumber.
12
NR90GC2
ø 3.0 – 3.3 mm (.120" – .131") See Fig.
25 – 37 nails (1 strips)
347 mm (L) × 353 mm (H) × 108 mm (W)
(13-21/32" × 13-29/32" × 4-1/4")
3.4 kg
Type No. 753-600 ........ sold separately
Liquid hydrocarbon; propane, butane 40 g / 80 ml
Single phase: AC 230 V 50 Hz
Approx. 30 minutes (At temperature of 20°C (70°F))
7.2 V – 18 V
2.6 A
0.3 kg (0.7 lbs)
Min. Max.
6.8 mm
7.7 mm
(.266")
(.303")
3.3 mm
3.0 mm
(.131")
(.120")
Piston reciprocating
ø 2.9 – 3.3 mm (.113" – .131") See Fig.
362 mm (L) × 353 mm (H) × 108 mm (W)
(14-1/4" × 13-29/32" × 4-1/4")
Piston reciprocation
0°C to 40°C (32°F to 104°F)
BCL715G (1.5 Ah 2 cells)
Li-ion battery, 7.2 V
NR90GR2
Plastic-collated strip nails
Full-head nails
NR90GR2
32 – 35 nails (1 strips)
3.5 kg
Min. Max.
7 mm 7.6 mm
(.286") (.3")
2.9 mm 3.3 mm
(.113") (.131")