Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.2.1.2.
Loading via FTP or Serial File Transfer
The application files can also be loaded via FTP through the optional Ethernet port, or by serial file
transfer through the COM1 serial port. Refer to Appendix C, Communication, in the IND570 User's
Guide for details on transferring files to the IND570 via FTP or serial file transfer.
2.3.
Mounting the Packaged Enclosure
The IND9D57 is designed to mount on a flat surface, either vertically or horizontally. The hardware
to mount the terminal to its mounting surface is not included with the terminal and must be
supplied locally. Ensure that the mounting hardware is capable of supporting the weight of the
terminal which is approximately 40 lb (18 kg).
Use the enclosure assembly as a template to mark the position of the mounting holes on the
mounting surface. Once the hole positions are established, drill holes in the mounting surface that
are suitable for the type of mounting hardware involved in the application. Then, using the locally
supplied mounting hardware, secure the enclosure to the mounting surface.
2.4.
Installing Cables and Connectors
2.4.1.
Provided Cable Glands
Figure 2-1 shows a typical arrangement of cable glands for a packaged IND570dyn, and the
intended purpose of each.
* Note that the split grommet needed for the USB or Ethernet cable gland will be included with the
documentation package shipped with the unit.
2.4.2.
Wiring Connections for Instrument Power
All IND9D57 configurations come with provisions to provide power to the IND570 terminal and the
24 VDC power supply. Wire terminals for the unit's power power will always be labeled L, N and
GND.
•
2-2
METTLER TOLEDO IND9D57/Dyn-570 Dynamic Weighing System Installation Manual
Photo-Eye
Cable
AC Power
L is for line, live or hot
Figure 2-1: IND570dyn Cable Glands
Home Run
Cable
USB or
Ethernet*
I/O Cable
30416342
|
02
|
12/2018
Werbung
Kapitel
Inhaltsverzeichnis
