Candy CBP612/3 Montage- Und Gebrauchsanweisung Seite 19

Replacing lamps
Disconnect the appliance from the electricity.
Warning! Prior to touching the light bulbs ensure they are
cooled down.
Replace the old light bulb with the one of the same type as
specified in the feature label or near the light lamp on the
hood.
Remove the grill.
Remove the damaged light and replace it with a new one (see
the table below):
Lamp Power (W) Socket
28 E14
Voltage (V) Dimension (mm)
67 (Light Center
230
Length)
ILCOS D Code
(according IEC 61231)
HSGSB/C/UB-28-230-E14-67
Put the grill back.
If the lights do not work, make sure that the lamps are fitted
properly into their housings before you call for technical
assistance.
19