Device Displays After The Unsuccessful Device Check; Inserting The Cassette Tube Set - Stryker Flosteady Handbuch

Operating the Device
EN
Fig. 5-3 Cassette tube set
(1) Tube cassette
Inflow tube
(2)
Y-connector
(3)
Tube clamp (2x)
(4)
Tap spike (2x)
(5)
Protective cap (2x)
(6)
Roller tube (pump segment)
(7)
(8) Pressure chamber
Protection cap for Luer Lock
(9)
Patient connection (Luer lock)
(10)
Instrument tube
(11)
A Detail of tube cassette
16
5.3.3

Device Displays after the Unsuccessful Device Check

The respective error is depicted on the touch panel if the device check was unsuc-
cessful. For example:
• Device error
• Motor error
• Sensor error
• Electronics error
• Keyboard error
• Calibration error
• Tube detection error
All other displays are not depicted in this case. See chapter 16 "Error and Warning
Messages", for more details.
5.4

Inserting the Cassette Tube Set

The device is designed exclusively for use with a sterile packaged cassette tube
set consisting of the inflow tube (2), tube cassette (1) and instrument tube (11).
(11)
(10)
(9)
A
(8)
(11)
(7)
(2)
(1)
(2)
(3)
(4)
(5)
(6)