Troubleshooting - Motorola PMLN7018 Bedienungsanleitung

6078.book Page 5 Thursday, August 9, 2012 11:54 AM
Battery charging status can be determined by referring to the
TETRA MTP3000 Series Handportable Terminal display.

TROUBLESHOOTING

This paragraph provides typical malfunctions that can occur
during the operation of the PMLN6181 & PMLN6182
Vehicular Charger Kit. The paragraph also suggests
corrective actions.
Prior to troubleshooting the malfunction, verify the following:
• Your TETRA Handportable Terminal functions properly
outside the cradle.
• The cable to the cradle is properly connected.
Identify the malfunction in accordance to Table 1 below. If the
malfunction does not appear in Table 1 below, refer to your
Service Provider.
Follow steps in Table 1 below after inserting the TETRA
Handportable Terminal into the cradle and turning the ignition
switch to ON.
Table 1: Troubleshooting Procedures
No. Malfunction
1 Indication of
charging on
the TETRA
Handportable
Terminal
display does
not exist.
2 Charging
Indication
does not exist.
Corrective Action
1. Remove the TETRA
Handportable Terminal from the
cradle and install it again.
2. If the malfunction persists, refer
to your Service Provider.
1. Verify that the ignition switch is
in ON position.
2. Remove the TETRA Handport-
able Terminal from the cradle
and install it again.
3. If the malfunction persists, refer
to your Service Provider.
5