Items Supplied; Operation; Put On The Headphones - Silvercrest SKH 60 B1 Bedienungsanleitung

__TOZ93018_B4.book Seite 6 Montag, 17. Juni 2013 10:35 10
• To avoid any risk, do not make modifications to the device.
Repairs must be carried out by a specialist workshop or the
Service Centre.
4.

Items supplied

1 set of headphones
1 set of operating instructions
5.

Operation

• Remove all packing material.
• Check that the device is undamaged.
Connecting
1. Set the sound source to a low volume.
2. Insert the TRS connector|7 into the headphone socket of the
sound source (e.g. MP3 player, television).

Put on the headphones

1. Put on the headphones in such a way that the marking R is on
the right and L is on the left.
2. Figure A: Adjust the size of the headphones to your head
size using the two adjustable headphone earpieces|3 and|5
by pulling out or pushing in the brackets|2.
3. Set the volume of the sound source. Ensure that you are still
able to hear sounds in your surroundings.
Connecting a second set of headphones
The socket|4 can be used to attach a second set of headphones
with a 3.5 mm TRS connector, to allow a second person to listen in.
6
GB