For The Customers In Canada; For The Customers In Europe; For The Customers In Korea - Sony LMD-2451MD Gebrauchsanweisung

Recommended separation distances between portable and mobile RF communications equipment and the LMD-
2451MD
The LMD-2451MD is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The
customer or the user of the LMD-2451MD can help prevent electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (Transmitters) and the LMD-2451MD as recommended below, according to the
maximum output power of the communications equipment.
Rated maximum output power of transmitter
0.01
100
For transmitters rated a maximum output power not listed above, the recommended separation distance d in meters (m) can be
estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from
structures, objects and people.
Disposal of Old Electrical & Electronic
Equipment (Applicable in Republic of India)
This symbol indicates that this product shall not be
treated as household waste and may not be dropped in
garbage bins. Product owners are advised to deposit
their product at the nearest collection point for the
recycling of electrical and electronic equipment.
Your co-operation shall facilitate proper disposal & help
prevent potential negative consequences/hazards to the
environment and human health, which could otherwise
be caused by inappropriate waste disposal including
improper handling, accidental breakage, damage
and/ or improper recycling of e-waste. The recycling
of materials will help to conserve natural resources.
For more detailed information about recycling of this
product, please contact your local civic office, your
household waste disposal service provider or the store
where you made the purchase. You may contact our
company's toll free number in India for assistance.
This product complies with the "India E-waste Rule
2011". The Ewaste Rules, 2011 is an Indian directive
aimed at reducing the harmful environmental impact of
waste electrical equipment by restricting the use of
known hazardous substances. As of 1st May 2012, new
48
W
0.1
1
10
Separation distance according to frequency of transmitter
150 kHz to 80 MHz 80 MHz to 800 MHz
d = 1.2 √P
0.12
0.38
1.2
3.8
12
electrical and electronic equipment introduced into the
market may no longer contain the following chemicals
or its specified maximum concentration levels: Lead,
Mercury, Hexavalent Chromium, Polybrominated
Biphenyls (PBB) or Polybrominated Diphenylethers
(PBDE) - in concentrations exceeding 0.1 weight % and
Cadmium - 0.01 weight %, except of exemptions set in
Schedule 2 of the aforesaid Rule.
For the customers in the U.S.A.
SONY LIMITED WARRANTY - Please visit http://
www.sony.com/psa/warranty for important
information and complete terms and conditions of
Sony's limited warranty applicable to this product.

For the customers in Canada

SONY LIMITED WARRANTY - Please visit http://
www.sonybiz.ca/solutions/Support.do for important
information and complete terms and conditions of
Sony's limited warranty applicable to this product.

For the customers in Europe

Sony Professional Solutions Europe - Standard
Warranty and Exceptions on Standard Warranty.
Please visit http://www.pro.sony.eu/warranty for
important information and complete terms and
conditions.

For the customers in Korea

SONY LIMITED WARRANTY - Please visit http://
bpeng.sony.co.kr/handler/BPAS-Start for important
information and complete terms and conditions of
Sony's limited warranty applicable to this product.
m
800 MHz to 2.5 GHz
d = 1.2 √P d = 2.3 √P
0.12 0.23
0.38 0.73
1.2
3.8
12
2.3
7.3
23