2
1
cleaning the milk container unit
For a reliable performance of the milk container unit and consistently good
frothing results, it is very important that you follow each of the 2 cleaning
procedures below:
Flushing after every use (when you do not plan to froth milk again
1
straightaway).
cleaning all parts of the milk container unit after the last
2
use of the day.
Note: If you are unable to obtain high-quality frothed milk, the milk container
unit is probably dirty. Clean the milk container unit by following the instructions
in section 'Cleaning all parts after the last use of the day' in this chapter..
Flushing after every use
-
Every time you have used the machine to froth milk, the CLEAN
indicator lights up to remind you to flush the milk container unit by
filling the milk container unit with water and using the CLEAN button.
Note: You have to do this if you do not plan to froth milk again straightaway.
Philips advises you to flush the milk container unit within 30 minutes after you
have used it.
1
Move the milk container lever upwards and remove the milk
container unit.
2
Press the milk container lid release lever (1) and remove the milk
container lid from the milk container (2).
3
Pour out any milk that is left in the milk container and rinse the milk
container briefly under the tap.
4
Fill the milk container with cold water up to the latte macchiato
2-cup cappuccino
Note: Do not fill the milk container with warm or hot water. If you do, the
machine only produces steam and does not clean the milk container unit
properly.
indication.
EnglisH
17
/