urmet SIGNO 1740 Bedienungsanleitung Seite 15

B
– Hook up the handset of indoor station A. It will beep to indicate exit from programming mode.
– Check programmed function: release the handset A and press the programmed button. Check that all
indoor stations of user B ring and check audio.
– You will need to program indoor station B to call A to make the opposite call possible.
§
The other functions listed in the "Buttons functions" table will not be lost if the buttons are programmed
for this function because the intercom call is made with the handset off-hook.
INTERCOM FUNCTION IN THE SAME ApARTMENT
– Go to the apartment station to be programmed as caller (indoor station C1).
– Hold the door opener button pressed and pick up the handset. The indoor station C1 outputs a tone to
indicate that programming is in progress.
– Press the button to be programmed. The indoor station C1 will output a confirmation tone.
DS1740-011C
C1
1
C1
3
USER B
2
1