Herunterladen Inhalt Inhalt Diese Seite drucken

General Instructions - Multimetrix DM 92 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
English

General Instructions

Introduction
Description
Precautions in use
Guarantee
Unpacking
Repacking
Tachometer
Congratulations our your purchase of this ultrasonic distance meter.
The DM 92 has many easy-to-use features that will make your measuring
tasks faster and easier once you understand them.
The DM 92 is actually two measuring tools in one.
It can take measurements by bouncing sound waves off flat hard
surfaces such as walls or ceiling from 46 cm (1 ft 6 in) up to 18 m
ft) in the "single unit mode"
or from 1 m (3 ft) up to 75 m (250 ft) by sending infrared light signals to
the target (included) and receiving sound waves back from the target in
"dual unit mode".
Use the single unit mode for indoor measurements or whenever you are
measuring a suitable hard, flat surface, less than 18 m away.
Use the dual unit mode when you need to measure distance greater
than 18 m, when there is no suitable surface to bounce the signal off,
or when there are obstacles partially blocking the measuring path.
This equipment is guaranteed against any material defect or
manufacturing faults, in conformity with the general conditions of sale.
During this period (1 year), the manufacturer only may repair this
instrument. He reserves the right to carry out repair or replacement of all or
part of the equipment.
If the equipment is returned to the manufacturer, forward transport is at
the expense of the customer.
The guarantee does not apply in the event of:
unsuitable use of the equipment or by association with incompatible
equipment
modification of the equipment without the explicit authorization of the
manufacturer technical services
operation by a person not approved by the manufacturer
adaptation to a specific application not provided for in the equipment
definition or in the operating instructions
impact, fall or flooding.
All equipment has been mechanically and electrically checked before
being dispatched.
However, it is wise to check briefly that equipment was not damaged
during transport. If so, please contact our Marketing Department as soon
as possible and claim carrier legal reserve.
If the equipment is being sent back, please preferably use original
packaging and indicate as clearly as possible the reasons for sending it
back on a note enclosed with the equipment.
(60
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis