- EN -
Translation of the original Operating Instructions
Information about these operating instructions
Welcome to OASE Living Water. You made a good choice with the purchase of this product Varionaut 365/DMX/02.
Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
Ensure that all work on and with this unit is only carried out in accordance with these instructions.
Adhere to the safety information for the correct and safe use of the unit.
Keep these instructions in a safe place! Please also hand over the instructions when passing the unit on to a new
owner.
Symbols used in these instructions
GB
The symbols used in this operating manual have the following meanings:
Risk of injury to persons due to dangerous electrical voltage
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate
measures are not taken.
Risk of personal injury caused by a general source of danger
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate
measures are not taken.
Important information for trouble-free operation.
A
Reference to one or more figures. In this example: Reference to Fig. A.
→
Reference to another section.
Scope of delivery
Fig. A
Number
1
1
2
1
3
1
Operation requires the following units, which are not included in the scope of delivery:
• Ein DMX-RDM controller WECS (from OASE).
• DMX connection cable from OASE.
Intended use
Varionaut 365/DMX/02, referred to in the following as "unit", may only be used as specified in the following:
– For pumping normal water for water features and fountains.
• Operation under observance of the technical data.
• Use of the unit by persons who are familiar with the safety instructions in this manual and who will observe all the
instructions.
The following restrictions apply to the unit:
• Operation in swimming pools, bath tubs or water courses which could be used by persons, is forbidden!
Product Description (Fig. A)
A
Varionaut 365/DMX/02 is an immersion pump controlled by modern DMX RDM technology.
• The unit is ready for connection.
• The maximum height of the water column to be achieved is 16 m.
• The unit comprises a pump (4), a motor (3), an electronic box (2) and a DMX connection box (1).
• The following is to be connected to the DMX connection box (1): the DMX control unit and/or another unit controlled
by DMX signals.
• The pump (4) must be controlled with a DMX control unit.
• The DMX control unit is not part of our scope of delivery; it has to be ordered from OASE separately. Its design is
determined by the individual system. Adhere to the control unit operating instructions.
• A DMX RDM control unit can be used instead of a DMX control unit.
Description
DMX-terminal
electronic box
Varionaut 365
- EN -
11