General Guidelines - Velleman LABPS1502AN Bedienungsanleitung


Do not disassemble or open the cover of this appliance under any circumstances.
Touching live wires can cause life-threatening electric shocks. Apart from the fuse,
there are no user-serviceable parts.

This appliance will heat up during use. Make sure the ventilation openings are clear
at all times. For sufficient air circulation, create a 25 mm clearance in front of the
ventilation openings. Ensure the appliance is installed on a flat, heat-resistant
surface. Do not place the appliance on carpet, fabric or any other flammable
surface.

Always disconnect the appliance from the mains power when not in use. Handle the
power cable by the plug only.

Keep this appliance away from dust and extreme temperatures.

Avoid brute force when operating the device. Do not drop it.

Immediately discontinue use if you notice any damage to the appliance or cables.
Do not attempt to repair any damage yourself.
3.

General Guidelines


Refer to the Velleman
manual.

All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.

Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.

Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical...) arising
from the possession, use or failure of this product.

Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
#
1
2
3
4
5
6
7
V. 01 – 18/03/2019
LABPS1502AN
®
Service and Quality Warranty on the last pages of this
Function
voltage display indicates the output voltage
current display indicates the output current
+ output used for the connection of the load's positive terminal
- output used for the connection of the load's negative terminal
on-off switch
current knob rotary switch for the adjustment of the output current
voltage knob rotary switch for the adjustment of the output voltage
Description
4 ©Velleman nv