Installation; Surface And Flush Mount - Eneo PXD-2080Z03 Schnellinstallationsanleitung

Surface and flush mount

1. Locate the mounting template at the installation position and drill the
ceiling or wall if needed.
1a. Surface: Place Surface mount
base on pre-drilled position and fix it
through ⓜSurface mount holes(x4)
by using Mount screws.
Assemble the cable pipe, otherwise
tighten pipe hole cap.
2. Route cables to the installtion position and connect audio, power, alarm
and LAN cables as required.

Installation

DE
EN
FR
PL
RU
23