Bartscher 900 K4 Serie Installation, Benutzung Und Wartung Seite 31

(Table 1) TECHNICAL FEATURES
Model
K4ECIP05TT Top induction range 2 plates
K4ECIP10TT Top induction range 2 plates
K4ECIP05VV Induction range 2 plates on open cabinet
K4ECIP10VV Induction range 4 plates on open cabinet
WARNINGS
General
 The appliance has been designed for cooking meals contained in pots, pans, trays or similar
tools suitable for such use.
 Read the instructions carefully before installation, use and maintenance of the appliance.
 The installation has to be performed by qualified personnel following the manufacturer's
instructions given in the provided manual.
 The appliance is suitable only for preparing and cooking food in commercial kitchens such as
those used in restaurants, hospitals, company canteens, cooking centres, butcher's shops and
food production firms. Any other type of use is not in accordance with the intended purpose and
could place people and/or objects at risk.
 The appliance is intended to be used EXCLUSIVELY with containers that are suitable for
contact with food and resistant to heat. Any other use is not considered appropriate.
 The appliance should only be used by trained personnel and for its designed use.
 Due to the nature of the appliance, the temperatures required for cooking may cause various
areas of the panelling, as well as kitchenware, to become hot. This is not a construction defect,
but a physical phenomenon caused by the chemical and physical properties of the materials used
for the construction of the appliances.
 In the event of breakdown or malfunction, switch off the appliance and seek help exclusively
from an authorized technical support centre.
 Only use genuine spare parts; otherwise no liability is assumed by the manufacturer.
 The appliance must not be washed with high pressure water sprays and the vents or inlets/outlets
for air, fumes and heat must not be obstructed.
 Before connecting the device make sure that the plate specifications correspond to the electrical
supply.
 No appliance with a damaged glass ceramic hotplate (broken, cracked or split) should be used under
any circumstances, but should be brought immediately to an authorized technical support centre.
 The working surface should not be used as a storage surface, since it could be accidentally switched
on and damage objects placed on it.
 Ensure no hard objects fall on the glass of the cooker, since, depending on the type of impact, this
could damage it.
 When cooking, avoid placing pots and pans and/or crockery on the hotplate that are partially
resting on the stainless steel part of the hob, or the steel may overheat.
 The appliance is provided with a series of filters for treating inlet air towards electronic
components. Clean the filter regularly and ensure that intake air does not contain a high rate of fats
(in particular, if the appliance is close to fryers, griddle plates or braising pans).
 Under no circumstances should the air intake section or the appliance air outlet chimney be closed.
 Pay attention not to turn the knob on the wall switch more than 5 times per day; otherwise the
appliance may be damaged.
Description
Pag. 31/53
Dimensions Electric power
WxDxH [mm] (E) [Kw]
400x900x250 14
800x900x250 28
400x900x845 14
800x900x845 28
Tension
Freq. (G) Cable type H07
(F)
[Hz] RN-F [mm2]
[V]
400 3 50/60 4x4
400 3 50/60 4x10
400 3 50/60 4x4
400 3 50/60 4x10
Induct.
7 kW
[N°]
2
4
2
4