Cochlear Baha Divino Handbuch Seite 3

Welcome
Congratulations on your Cochlear
use Cochlear's advanced bone conduction sound processor.
This manual is full of tips and advice on how to best use and care for your Baha sound
processor. By reading this manual and then keeping it handy for future reference, you'll
ensure that you get the most benefit out of your Baha sound processor.
Key to device
See figure 1
1. Program selector
2. Microphone
3. Direct audio input
4. Volume control
5. Plastic snap connector
6. Battery door
7. Battery compartment
8. Serial number
9. Attachment point for the safety line
Note on figures: The figures included on the
front cover correspond to information specific
to this model of sound processor. Please
reference the appropriate figure when reading.
The images shown are not to scale.
Baha Divino sound processor. You are now ready to
™ ®
Introduction
The Baha Divino® sound processor uses direct
bone conduction to transmit sounds to the
cochlea (inner ear). It works by combining a sound
processor and a small titanium implant that is
placed in the skull behind the ear. The skull bone
integrates with the titanium implant through a
process called osseointegration. This allows sound
to be conducted via the skull bone directly to the
cochlea, which improves hearing performance.
The Divino comes in both left and right hand
versions (indicated on the sound processor label)
to allow optimal positioning of the directional
microphone. It is essential to use the correct
version for the corresponding ear.
To ensure optimal performance, your hearing
care professional will fit the processor to suit your
needs based on your connection configuration.
Be sure to discuss any questions or concerns that
you may have regarding your hearing or use of
this system with your hearing care professional.
Be sure to follow all applicable instructions in
this manual based on your specific connection
configuration.
English
3