unotec PENCAM Handbuch Seite 6

Manual
K1: On/off button, separate Audio recordings.
K2: Camera.
K3: Motion detecting camera.
K4: State indicator.
K5: Scene.
K6: Microphone.
K7: Micro SD card slot
K8: USB port.
Buttons
K1 + K2 keys are used to reset the pendrive when it doesn't respond
properly.
K1 key: used to make separate recordings.
K2 key: used to enter the camera mode.
K3 key: used to enter the motion detection mode.
On/off
Press the K1 button for a long time. The blue and red will flash and the
device will vibrate. The device will start once the blue light stops flash-
ing. The red light flashing and device is in standby mode. Press the K1
button for a long time and the device will turn off after the light flashes
3 times.
Photo mode
When in standby mode, press the K2 key.The blue lights will on and red
lights will turn off when a photo is being taken and saved. Once it has
finished, the red light will stay on and it will enter standby mode.
Camera mode
While in standby mode, press the K2 key for long time. The pendrive will
vibrate twice. The red light will turn off after it flashes 3 times after that
will start recording video. During the video recording, if press the K1 or
K3 keys the red light will turn off after 6 flashes and this means currently
is recording video. Press the K2 key to stop this function. The machine
will vibrate once and red light will stay on and will enter standby mode
again
Audio recording mode
If you press the K1 key while on standby the pendrive will vibrate once,
the red light will turn off and the blue light will flash 3 times, also will off,
and It will now start Audio recording. Press the K1 key again to stop the
6 english