Introduction; Safety Precautions - OHAUS MB35 Bedienungsanleitung

EN-2

1. Introduction

Thank you for deciding to purchase a MB35 Halogen Moisture Analyzer from Ohaus. Behind your
instrument stands OHAUS, a leading manufacturer of precision Moisture Analyzers, Balances, Scales and
Indicators. An Aftermarket Department with trained instrument technicians is dedicated to provide you
with the fastest service possible in the event your instrument requires servicing.

1.1 Safety Precautions

Your Moisture Analyzer employs state of the art technology and meets the latest
demands regarding instrument safety. Improper operation can endanger personnel
and can cause property damage. For safe and dependable operation, please comply
with the following instructions:
— The Moisture Analyzer is used for determination of the moisture in samples.
— The Moisture Analyzer must not be operated in a hazardous environment and
— The Moisture Analyzer may be operated only by trained personnel who are
— Your Moisture Analyzer is supplied with a 3-pin power cable with an equipment
The Halogen Moisture Analyzer works with heat!
— Ensure sufficient free space around the instrument to avoid heat accumulation
— Never place flammable materials on, below or next to the instrument as the area
— Exercise caution when removing the sample. The sample itself, the sample
— During operation, you should never open the dryer unit as the ring-shaped
Please use the instrument exclusively for this purpose. Any other type of use can
endanger personnel and damage the instrument or other property.
only under ambient conditions specified in these instructions.
familiar with the properties of the samples used and with the handling of the
instrument.
grounding conductor is prohibited.
and overheating (approximately 1 m free space above the instrument).
around the dryer unit warms up.
chamber and any sample containers may still be very hot.
heating element or completely.
MB35