Herunterladen Inhalt Inhalt Diese Seite drucken

Lawn Mower; Notes To The Instructions For Use; Correct Operation; Assembly - Brill MulchCut series Handbuch

Benzin-rasenmäher
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

1. Notes to the instructions for use

Users are requested to read these
instructions for use carefully and
observe the contents as well as
the enclosed notes on safety pre-
cautions. In conjunction with the
instructions for use, users should
familiarise themselves with the
machine, its adjuster controls,
its correct operation as well as
with the safety precautions.

2. Correct operation

The lawn mower is designed for
the cutting of lawns and grass
spaces in private-house and hobby
gardens, and not for commercial
use in public spaces, parks, sports
grounds, along the streets and
in agriculture and forestry.
Compliance with the instructions
for use enclosed by the manufac-

3. Assembly

3.1. Check of complete machine
assembly
The original packaging includes
the following parts:
Lawn mower machine complete
.
Grass collection hopper
.
Mulch box (in the grass cuttings
.
collector box)

4. Preparing the machine for use

Figure 2
Caution ! The machine is
A
supplied without oil in the
crankcase of the motor. Before
starting, care should be taken to
ensure that the crankcase is filled
with SAE 30 oil up to the upper
marking on the dipstick. The
crankcase holds approximately
0.6 litres
(Honda GCV engine
approximately 0.55 litres)
Children or other persons,
A
who are unfamiliar with
these instructions for use, should
never be permitted to operate
the lawn mower. Local authority
regulations may also require a
minimum age for users.
Never use the mower when other
persons, especially children or do-
mestic animals are in the vicinity.
turer is a precondition for the
regular use of the machine. The
instructions for use also include
the operating, servicing and
maintenance conditions.
Caution ! Because of the
A
danger of bodily harm, the
machine may not be used to trim
Sparking plug spanner
.
Instructions for use / warranty
.
card
Index of service stations
.
3.2. Assembly of
the handlebar frame
Figure 1
The oil level in the crankcase
should be checked before each
mowing session. To check the oil
level, park the machine on a level
surface and withdraw the dipstick.
The oil level shown on the dipstick
of the Honda motor must be with-
in the ribbing mark and with all
other motors
and Max (FULL) (Fig. 2).
(Fig. 2).
between Min (ADD)
You should be aware, that the user
of the mower or the owner is liable
in case of any accidents to other
persons or loss or damage to third
party property.
These instructions for use should
be kept in a safe location.
bushes, hedges and shrubs, nor
for the cutting and size-reduction
of creeper plants or lawns on
roof gardens or in balcony boxes.
The machine may also not be
used as a chopper for decimation
and breaking up of cuttings from
trees and hedges as well as for
the levelling of uneven ground.
Unfold the handlebar frame and
tighten the transom tightening grip
(Fig. 1, Pos. 1).
The handlebar frame should be
adjusted to the required height
until the latch engages. The right
and left lower joint-tensioning
grips should then be firmly secured
(Fig. 1, Pos. 2).
Normal low octane motor spirit
is recommended as fuel.
Caution ! Motor spirit fuel
A
is highly flammable.
Ensure that motor spirit fuel is only
stored in the containers intended
for that. Fuel should only be
topped-up outdoors and smoking
should not be indulged whilst
fuelling.
GB
19

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mulchcut 40 bMulchcut 40 b ohcMulchcut 40 brMulchcut 40 br v12Mulchcut 46 brMulchcut 46 br v12 ... Alle anzeigen

Inhaltsverzeichnis