Kripsol KLS series Betriebsanweisung Seite 26

DATA DISPLAY
1
This change of polarity can be modified by pressing button no. 1 (-) to
reduce the number of hours and button no. 2 (+) to increase them.
The data display section shows the voltage supplied to the cells and
the current consumption. To interpret these data correctly, the current value
shown on the display should be divided by 100 and the voltage divided by
10, this is for the 20, 30gr equipment, but for the 50, 100gr equipment the
is direct reading.
SCREEN No. 3
To move to the third screen press buttons 1 and 2 (-) and (+)
simultaneously to display the following screen.
1
This screen allows you to set the display language. Four alternatives
are available:
• Spanish
• English
• French
• Russian
SELECTED DISPLAY LANGUAGE
26 26
POLARITY
CHANGE
PROGRAMMING
2
2