Straightening Hair; Curling Hair - Silvercrest KH 5527 Bedienungsanleitung

• ...the 4th red LED, medium heat level, for robust
hair.
• ...the 3rd red LED, lower heat level, for normal
hair.
• ...the 2nd red LED, very low heat level, for fine
hair.
• One red LED blinks, minimal heat level, for very
fine hair.
5. When the running light progresses to the selected
heat level, double press the On/Off
The green LED glows. The buttons are now lok-
ked, the temperature cannot be changed by an
unintentional pressing of the buttons
"+" or "-" .
4 4
Note:
When you want to release the temperature
lock, once again double press on the On/Off
button. The green LED goes out, the button
lock is released.
6. Wait until the running light in the LED Indicator
glows permanently up to the programmed
temperature. The desired temperature has now
been reached.

Straightening hair

• Prepare the hair as described in "Before
straightening/ Before curling"..
• Start with the lower hair sections at the back
of the head. Work over the sides to the front.
1. Separate a ca. 2 cm wide hair strand.
Attention!
Ensure that the hotplates
with the skin of the head. Risk of Burns! Only the tips
are cool.
5 button.
5
2 do not make contact
2. Clamp the hair strands between the hotplates
and close to the skin, then press them together.
3. Pull the whole of the hair strand through the
hotplates 2
downwards.
4. Repeat the process with each individual strand.
5. When you have smoothed all of the strands,
double press the On/Off
the temperature lock. The green LED goes out.
6. Press the On/Off
tor 3 goes out.
7. Remove the plug from the wall power socket.
8. Press the hotplates
locking device

Curling hair

• Prepare the hair as described in "Before
straightening/ Before curling".
• Start with the lower hair sections at the back
of the head. Work over the sides to the front.
1. Separate a ca. 2 - 3 cm wide hair strand.
3
Attention!
Ensure that the hotplates
with the skin of the head. Risk of Burns! Only the
tips 1 are cool.
2. Clamp the end of hair strand between the hot-
plates 2 and press them together.
3. Turn the combi hair styler to wrap the hair
strand around the hotplate.
4. Dependant on hair type and adjustment,
wait a few seconds.
Attention!
Dependant on the hair type and the heat level, it
1 can take a differing length of time until a curl is shaped.
Try out various adjustments.
To avoid damaging your hair, ALWAYS start with a
lower heat level and a short waiting time in the hair.
Gradually raise these levels until you discover the
optimal adjustment for you.
- 22 -
, in that you pull the hair straightener
button to release
5
5 button until the LED Indica-
2 together and slide the
7 to the position
2 do not make contact
2
.