Herunterladen Inhalt Inhalt Diese Seite drucken

Finishing The Installation - LUCCI Air AIRFUSION DC series Installationsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 13
Banksia Fan Installation Instructions
Loosen the 2 screws from the bottom of the mounting bracket.
Slide the canopy up to the mounting bracket and place the key hole on the canopy over the screw on the
mounting bracket, turn the canopy until it locks in place at the narrow section of the key holes and secure
it by tightening the two set screws. Avoid damaging the electrical wiring prepared previously.
How to replace the LED driver (For models with light kit)
NOTE: Always turn Off the power at the mains switch before attempting to replace the LED driver.
Loosen the screw (A) to lift the top housing (B). Replace the LED driver by unplugging the connectors (C, D).
Reposition the top housing and secure it on the down rod by screw.
8 | P a g e

FINISHING THE INSTALLATION

Fig. 7
Fig. 8

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Banksia dc series

Inhaltsverzeichnis