Technical Specifications; Troubleshooting; Warranty - GYS NOMAD POWER PRO TRUCK Betriebsanleitung

Translation of the original instructions
For power apply to 12 V vehicle products or 12 V electronics
1. When 12 V electronics/automotive products connected to the cigarette lighter port.
2. Press the switch button
USING AS LED FLASH LIGHT
Press the switch
3
There are 4 modes of LED light appear in order (normal. strobe. SOS. off) if you press slightly.

TECHNICAL SPECIFICATIONS

Dimension: 248 x 248 x 96 mm
Weight: 2230 g
Battery Capacity: 5.3 Ah
Output: 5 V 1 A; 5 V  2.1 A; 12 V  10 A
Input: Quick Charge 5V  2A; 9 V  2 A; 12 V  1,5 A
Full charging time: About 10 hours
Starting current: 12 V / 600 A ; 24 V /600 A
Peakcurrent: 12 V / 1500 A ; 24 V / 1500 A
Operating temperature : -20°C ~ 60°C / - 4°F ~ 140°F

TROUBLESHOOTING

Finding
No response when pressing the
switch button

WARRANTY

The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
12
NOMAD POWER PRO TRUCK
to power supply.
3
3 seconds to start the LED flash light
Low voltage protection of Jump Star-
ter is started.
.
12
Cause
Plug the adaptor into the Quick Charge
input port to activate.
EN
Remedies