GPO Piccadilly Handbuch Seite 15

REMOVING THE STYLUS (NEEDLE)
NOTE: If not done correctly, separating the STYLUS from the ceramic
CARTRIDGE can cause damage to the CARTRIDGE. If needed,
please seek assistance from an experienced individual.
1. Lock the TONE ARM (3) on the TONE ARM LOCK & REST (5) by
pushing the TONE ARM LOCK to the left
2. Remove the white protective Stylus Cover (if necessary).
3. Hold the bottom of the CARTRIDGE with your thumb & index finger,
as shown below in Fig. 3a. With your other thumb carefully push
down on the top edge of the Red Stylus Assembly (Red piece
includes the needle) until the Stylus Assembly separates from the
CARTRIDGE as shown in Fig 3b.
4. Carefully remove the entire Stylus Assembly from the Cartridge by
pulling the Stylus Assembly away from the CARTRIDGE (FIG 4a).
15